Enter your project dimensions to calculate the EPODEX quantity you need, including waste allowance, then check the intended pour against verified ECO+ / PRO+ mix-ratio, depth and temperature guidance. EpoxyCalc is independent and is not affiliated with or operated by EPODEX.
Calculate quantity first. Product matching only uses verified manufacturer data.
Compatibility below is restricted to the EPODEX ECO+ / PRO+ system in the verified EpoxyCalc database. Pour depth and entered temperature are checked separately from quantity.
Some merchant links may be affiliate links. EpoxyCalc may earn a commission at no extra cost to you. Affiliate disclosure
The technical fit is verified, but current kit pricing or a reliable mass-to-volume purchase basis is not complete enough for a cost comparison.
View official product →EpoxyCalc currently catalogs the EPODEX ECO+ / PRO+ casting system for river tables, deep pours and mold casting in the European market. The values below come from the manufacturer source recorded in the product database and were last checked on 2026-09-13.
| Conservative max layer | 50 mm / 1.97 in |
|---|---|
| Mix ratio | 2:1 by volume |
| Published density | 1.10 kg/L |
| Minimum processing temperature | ≥ 15 °C |
| Working time | 240–360 min |
| Cure / handling guidance | 48–72 h |
The calculator uses the actual volume of the cavity, not a generic coverage guess. Enter length, width and pour depth, then choose a waste allowance. The main result is the planned purchase quantity in your preferred Metric or Imperial unit system.
First calculate the cavity volume from length, width and depth. The calculator then adds the waste percentage you choose. For a large casting or river-table style project, compare your intended layer depth with the verified 50 mm planning limit before selecting the product.
Quantity and compatibility are separate decisions. A project may need 20 litres of resin but still require more than one layer if the intended depth exceeds the verified limit for the relevant geometry.
The manufacturer page can present selectable variants and starting prices. EpoxyCalc does not turn that display into a made-up kit combination. Until the purchasable kit sizes and prices can be normalized reliably, EPODEX remains a technical match rather than a purchase-optimized price comparison.
This page exists because people already search for an EPODEX calculator and need a practical way to convert project dimensions into epoxy volume. EpoxyCalc is an independent planning site. The current EPODEX product page and technical instructions remain the controlling source before you order, mix or pour.
Merchant links may become affiliate links after approval. If so, EpoxyCalc may earn a commission at no extra cost to you. Affiliate disclosure