Enter your project dimensions to calculate how much epoxy you need, then check the result against verified Superclear Liquid Glass Deep Pour depth, temperature and mix-ratio guidance. EpoxyCalc is independent and is not affiliated with or operated by Superclear.
Calculate quantity first. Product matching only uses verified manufacturer data.
Compatibility below is restricted to the verified Superclear Liquid Glass Deep Pour system. Quantity, layer depth and entered temperature are checked separately.
Some merchant links may be affiliate links. EpoxyCalc may earn a commission at no extra cost to you. Affiliate disclosure
Price data is older than 30 days or incomplete. This cost is not used for Best Value or Lowest Waste until pricing is refreshed.
Technical source ↗Data last verified 2026-09-13EpoxyCalc catalogs Liquid Glass Deep Pour for river tables, deep pours and mold castings in the US market. The values below were last checked on 2026-09-13.
| Published single-pass range | 51 mm / 2.00 in – 102 mm / 4.00 in |
|---|---|
| Maximum published depth | 102 mm / 4.00 in |
| Mix ratio | 2:1 by volume |
| Recommended temperature | 21–29 °C |
| Demold / workable guidance | 48–72 h |
Calculate the cavity volume from length, width and pour depth, then add the waste allowance you want for mixing and practical losses. The calculator above shows the planned quantity in Metric or Imperial units and then checks the project against the verified product data.
Liquid Glass Deep Pour is published for 2 to 4 inch single-pass pours, but the upper limit is conditional. Total resin mass, temperature and heat dissipation affect the exotherm, so large or heavy projects should stay toward the conservative end of the range.
The verified ratio is 2:1 resin to hardener by volume. For an exact batch split, use the resin and hardener ratio calculator and keep the ratio basis set to volume.
EpoxyCalc stores the currently verified 48 oz, 0.75 gallon, 1.5 gallon and 3 gallon kit options. When current pricing is complete, the product matcher can compare combinations and show estimated leftover material rather than simply rounding to one oversized kit.
This page is an independent planning tool. Re-check the current Superclear product instructions before ordering or pouring, particularly when a project approaches the maximum published depth.
Merchant links may become affiliate links after approval. If so, EpoxyCalc may earn a commission at no extra cost to you. Affiliate disclosure