Rust-Oleum EPOXYSHIELD Garage Floor Coating

Manufacturer-published floor coverage

Coverage is stored as published area-per-kit or area-per-coat data. EpoxyCalc does not convert mass-based kits to litres unless the manufacturer supplies a reliable conversion basis.

Recommended coats: 1

How to use this product data

EpoxyCalc currently catalogs this system for garage floor. Floor products are compared using manufacturer-published coverage data rather than casting depth. The listed mix ratio is 2.75:1 by volume. Always measure using the method stated by the manufacturer because weight and volume ratios are not automatically interchangeable.

This page is a planning reference, not a substitute for the current technical data sheet. Re-check the manufacturer guidance before a large pour, especially when temperature, total mass or project geometry is near a published limit. Product availability and prices can also change after the verification date shown above.

Need the exact resin and hardener amounts for this product's published ratio? Use the resin and hardener ratio calculator and keep the manufacturer's weight / volume basis unchanged.

Verified notes

• Two-component water-based amine-cured epoxy coating for sound indoor concrete garage floors.
• The technical data sheet publishes approximately 250 sq ft (23.2 m²) practical coverage at the recommended dry-film thickness, assuming 15% material loss.
• The can-kit technical data publishes a 2.75:1 base-to-activator mix ratio by volume.
• The product page recommends an application temperature of 60–85°F (15.6–29.4°C).
• New concrete should cure for at least 28 days before coating; confirm the current preparation instructions before application.

Kit and price snapshots

Some merchant links may be affiliate links. EpoxyCalc may earn a commission at no extra cost to you. Affiliate disclosure

Manufacturer sources