ResinPro EpoxyTable 5-Five

How to use this product data

EpoxyCalc currently catalogs this system for river table, deep pour, mold casting. The stored general maximum layer is 50 mm (2.0 in). The listed mix ratio is 100:55 by weight. Always measure using the method stated by the manufacturer because weight and volume ratios are not automatically interchangeable.

This page is a planning reference, not a substitute for the current technical data sheet. Re-check the manufacturer guidance before a large pour, especially when temperature, total mass or project geometry is near a published limit. Product availability and prices can also change after the verification date shown above.

Need the exact resin and hardener amounts for this product's published ratio? Use the resin and hardener ratio calculator and keep the manufacturer's weight / volume basis unchanged.

Verified notes

• Official product guidance states casting up to 5 cm per layer, subject to project size and total resin mass.
• The manufacturer specifies a 100:55 resin-to-hardener ratio by weight.
• The manufacturer publishes additional mass limits by depth; for example, a 5 cm pour is capped at 12 kg per application.
• Official ResinPro pages currently show inconsistent pot-life values, so EpoxyCalc intentionally omits pot-life from the comparison until the conflict is resolved.
• Current variant pricing is not normalized into the purchase optimizer yet.

Kit and price snapshots

Some merchant links may be affiliate links. EpoxyCalc may earn a commission at no extra cost to you. Affiliate disclosure

Manufacturer sources