All Purpose Coatings EPO100T Tinted Epoxy Coating

Manufacturer-published floor coverage

Coverage is stored as published area-per-kit or area-per-coat data. EpoxyCalc does not convert mass-based kits to litres unless the manufacturer supplies a reliable conversion basis.

Recommended coats: 2

How to use this product data

EpoxyCalc currently catalogs this system for garage floor. Floor products are compared using manufacturer-published coverage data rather than casting depth. The listed mix ratio is 3:1 by volume. Always measure using the method stated by the manufacturer because weight and volume ratios are not automatically interchangeable.

This page is a planning reference, not a substitute for the current technical data sheet. Re-check the manufacturer guidance before a large pour, especially when temperature, total mass or project geometry is near a published limit. Product availability and prices can also change after the verification date shown above.

Need the exact resin and hardener amounts for this product's published ratio? Use the resin and hardener ratio calculator and keep the manufacturer's weight / volume basis unchanged.

Verified notes

• Australian-made two-pack industrial epoxy coating for residential, commercial and industrial floors and walls.
• Manufacturer publishes a spread rate of 3–8 m²/L depending on system, application method and substrate porosity.
• Manufacturer states that two coats are required.
• The 4 L kit contains 3 L tinted epoxy resin Part A and 1 L hardener Part B, giving a 3:1 package ratio by volume.
• Public prices below are the manufacturer-listed prices and are shown excluding GST on the product pages.

Kit and price snapshots

Some merchant links may be affiliate links. EpoxyCalc may earn a commission at no extra cost to you. Affiliate disclosure

Manufacturer sources